Punished Props Logo Sticker

$4.99

Want to show your love for Punished Props Academy while directly supporting us? The Punished Props Academy logo sticker is now available for purchase. The logo stickers are cut in-house and hand packed for shipping.

Find application instructions below.

Logo Sticker measures 4″ x 2 7/8″

 Material Spec:

  • Finish – Gloss
  • Adhesive – Solvent based permanent
  • Indoor durability – 10 years +
  • Outdoor Durability – 6 years +
  • Thickness – 2.5 mils
  • Waterproof – Yes
  • Permanent solvent-based adhesive
  • Most opaque film available

Application instructions:

Clean the area thoroughly with rubbing alcohol or soapy water.

  1. Peel the white paper backing off the sticker. If the sticker sticks to the paper backing, slowly lay the sticker back on the backing and press down firmly on the problem area. Now peel again.
  2. Place the sticker onto the desired area for application and use a credit card or squeegee to firmly press into place. For best results start in the middle and sweep outward.
  3. At an angle, slowly peel the transfer tape off of the surface and vinyl. Be careful not to pull the sticker off the surface. If the sticker pulls away from the surface, lay it back down and press the problem area into place.

Thoroughly clean surface to ensure they’re free from dust, grease or any other contamination that may affect the adhesion of the material. Give freshly painted surfaces proper time to dry.

Clear
SKU: Logo-Sticker Categories: ,

Description

Want to show your love for Punished Props Academy while directly supporting us? The Punished Props Academy logo sticker is now available for purchase. The logo stickers are cut in-house and hand packed for shipping.

Find application instructions below.

Logo Sticker measures 4″ x 2 7/8″

 Material Spec:

  • Finish – Gloss
  • Adhesive – Solvent based permanent
  • Indoor durability – 10 years +
  • Outdoor Durability – 6 years +
  • Thickness – 2.5 mils
  • Waterproof – Yes
  • Permanent solvent-based adhesive
  • Most opaque film available

Application instructions:

Clean the area thoroughly with rubbing alcohol or soapy water.

  1. Peel the white paper backing off the sticker. If the sticker sticks to the paper backing, slowly lay the sticker back on the backing and press down firmly on the problem area. Now peel again.
  2. Place the sticker onto the desired area for application and use a credit card or squeegee to firmly press into place. For best results start in the middle and sweep outward.
  3. At an angle, slowly peel the transfer tape off of the surface and vinyl. Be careful not to pull the sticker off the surface. If the sticker pulls away from the surface, lay it back down and press the problem area into place.

Thoroughly clean surface to ensure they’re free from dust, grease or any other contamination that may affect the adhesion of the material. Give freshly painted surfaces proper time to dry.

Additional information

Weight.01 lbs
Dimensions5 × 5 in
Color

Black, White